"The Sterling" (Sold)

NH35 Movement:

The NH35 is one of the most widely used automatic movements for a reason – it’s tough and accurate.

Automatic/self winding mechanical, 24 Jewels, 42 hrs power reserve.

55 turns of the crown = fully wound. The movement cannot be overwound thanks to its design.

Central hours; central minutes; central sweeping seconds; date calendar at 3:00 position.

Hacking (second hand stops when adjusting time).

Quick date set (see below).

28.5mm matte white with gold hour markers. Date at "3"

Gold baton hour/minute (no lume) and a silver lightning second hand  8 mm*11.5 mm*13 mm (measured from the center of the hand hole to the top of the hand) . Green luminous.

Brushed 38mm steel with “exhibition” (clear) case back, Anti-refelctive coatong on saphire glass. 10 atm water resistant.

20mm lug width (for bracelet/strap). Screw down crown.

Genuine hand stitched light brown full grain cow leather with white stitching and matching gold traditional pin buckle clasp. 

20mm lug width (for bracelet/strap).

The NH35A should be fully wound after about 55 manual turns of the crown.

Setting the time and date on a watch with the NH35 movement is straightforward:

First, unscrew the crown from its case.

1. Pull the crown out to the first position. This allows you to set the date.

2. Turn the crown to set the desired date. Rotate clockwise to change the date.

3. Pull the crown out to the second position. This stops the seconds hand, allowing for precise time setting (hacking function).

4. Turn the crown to set the desired time. Rotate clockwise or counterclockwise to move the hour and minute hands.

5. Push the crown back in to start the movement. The seconds hand will resume moving, and your time is set.

This movement is also equipped with the “Seiko Magic Lever” so shaking the watch side to side should get it going almost immediately.

Crown should be screwed in afterwards for effective waterproofing