The Details

28.5mm frosted white sunburst, no lume, applied chrome angled indices. Date at "3"

Chrome wildfire constellation hour/minute with blue/green luminosity and a silver second hand  8 mm*12.5 mm*12.5 mm (measured from the center of the hand hole to the top of the hand) . Blue BGW9 luminous.

38mm 316 brushed and polished stainless steel with “exhibition” (clear) case back, flush brushed steel bezel. 10 atm waterproof, Sapphire Crystal.

20mm lug width (for bracelet/strap). Screw down crown. 45mm lug to lug, 13.3mm thick , 20mm lug width.

Matching polished oyster  stainless steel bracelet, 

20mm lug width (for bracelet/strap) with folding buckle.

The NH35A should be fully wound after about 55 manual turns of the crown.

Setting the time and date on a watch with the NH35 movement is straightforward:

First, unscrew the crown from its case.

1. Pull the crown out to the first position. This allows you to set the date.

2. Turn the crown to set the desired date. Rotate clockwise to change the date.

3. Pull the crown out to the second position. This stops the seconds hand, allowing for precise time setting (hacking function).

4. Turn the crown to set the desired time. Rotate clockwise or counterclockwise to move the hour and minute hands.

5. Push the crown back in to start the movement. The seconds hand will resume moving, and your time is set.

This movement is also equipped with the “Seiko Magic Lever” so shaking the watch side to side should get it going almost immediately.

Crown should be screwed in afterwards for effective waterproofing